[Date Prev][Date Next] [Chronological] [Thread] [Top]

RE: Syncrepl and mmr

To: Quanah Gibson-Mount <quanah@zimbra.com>, "openldap-technical@openldap.org" <openldap-technical@openldap.org>
Subject: RE: Syncrepl and mmr
From: "Borresen, John - 0442 - MITLL" <John.Borresen@ll.mit.edu>
Date: Fri, 14 Feb 2014 16:28:02 -0500
Accept-language: en-US
Acceptlanguage: en-US
Content-language: en-US
In-reply-to: <201402141834.s1EIYbWS047940@boole.openldap.org>
References: <201402131554.s1DFsndc032876@boole.openldap.org> <88E13387E9F3EF88B800D17C@[192.168.1.2]> <201402141352.s1EDpx2n028673@boole.openldap.org> <201402141834.s1EIYbWS047940@boole.openldap.org>
Thread-index: Ac8o71UNH/tF0fj1QhicvnQPykUI+gAmNUTwAAq/7oAABQwokA==
Thread-topic: Syncrepl and mmr

All,

I just created an mm-server3, using the config_dbase and main_dbase from mm-server2 -- copied the ldif's I created from mm-server2 then ran slapadd.

On mm-server3:
olcServerID: 1 ldap://mm-server1.example.ldap
olcServerID: 2 ldap://mm-server2.example.ldap
olcServerID: 3 ldap://mm-server3.example.ldap

olcSyncrepl: {0} rid=001 provider=mm-server1.example.ldap bindmethod=simple binddn="cn=ldapadmin,dc=group42,dc=ldap" credentials=<password> interval=01:00:00:00 searchbase="dc=example,dc=ldap" logbase="cn=accesslog" schemachecking=on type=refreshAndPersist retry="60 +" filter="(objectClass=*)" attrs=*,+" syncdata=accesslog starttls=no
olcSyncrepl: {1} rid=002 provider=mm-server2.example.ldap bindmethod=simple binddn="cn=ldapadmin,dc=group42,dc=ldap" credentials=<password> interval=01:00:00:00 searchbase="dc=example,dc=ldap" logbase="cn=accesslog" schemachecking=on type=refreshAndPersist retry="60 +" filter="(objectClass=*)" attrs=*,+" syncdata=accesslog starttls=no
olcSyncrepl: {0} rid=003 provider=mm-server3.example.ldap bindmethod=simple binddn="cn=ldapadmin,dc=group42,dc=ldap" credentials=<password> interval=01:00:00:00 searchbase="dc=example,dc=ldap" logbase="cn=accesslog" schemachecking=on type=refreshAndPersist retry="60 +" filter="(objectClass=*)" attrs=*,+" syncdata=accesslog starttls=no

Started slapd, no errors.  It immediately sync'd up with mm-server1!  Changes that I made on mm-server1 days ago which have never replicated over to mm-server2...replicated to mm-server3 immediately on startup.

I had not even got around to adding mm-server3 to mm-server1 (or mm-server2) yet.

The olcServerIDs and olcSyncrepl on both mm-server1 and 2 show:
olcServerID: 1 ldap://mm-server1.example.ldap
olcServerID: 2 ldap://mm-server2.example.ldap

olcSyncrepl: {0} rid=001 provider=mm-server1.example.ldap bindmethod=simple binddn="cn=ldapadmin,dc=group42,dc=ldap" credentials=<password> interval=01:00:00:00 searchbase="dc=example,dc=ldap" logbase="cn=accesslog" schemachecking=on type=refreshAndPersist retry="60 +" filter="(objectClass=*)" attrs=*,+" syncdata=accesslog starttls=no
olcSyncrepl: {1} rid=002 provider=mm-server2.example.ldap bindmethod=simple binddn="cn=ldapadmin,dc=group42,dc=ldap" credentials=<password> interval=01:00:00:00 searchbase="dc=example,dc=ldap" logbase="cn=accesslog" schemachecking=on type=refreshAndPersist retry="60 +" filter="(objectClass=*)" attrs=*,+" syncdata=accesslog starttls=no

So...now, I am at even more of a loss.  Why would mm-server1 be replicating to mm-server3 and not 2?  When the configs are the same between mm-server2 and 3???



Thanks in advance...
John


-----Original Message-----
From: openldap-technical-bounces@OpenLDAP.org [mailto:openldap-technical-bounces@OpenLDAP.org] On Behalf Of Borresen, John - 0442 - MITLL
Sent: Friday, February 14, 2014 1:34 PM
To: Quanah Gibson-Mount; openldap-technical@openldap.org
Subject: RE: Syncrepl and mmr

All,

If I went off the beaten' path...where did I go wrong?   (my config and error messages are in a previous posting)

Thanks in advance,
John

-----Original Message-----
From: openldap-technical-bounces@OpenLDAP.org [mailto:openldap-technical-bounces@OpenLDAP.org] On Behalf Of Borresen, John - 0442 - MITLL
Sent: Friday, February 14, 2014 8:40 AM
To: Quanah Gibson-Mount; openldap-technical@openldap.org
Subject: RE: Syncrepl and mmr

Thanks Quanah,

A few weeks back I asked that question (on 1/30):
> All Masters in the chain have the olcServerID's and olcSynRepl for 
> itself and its partner?  I can understand having each knowing about 
> the others but why itself?  It's replicating to itself?
-You replied
-It knows about itself so it knows what to ignore.

Even in the Admin Guide is specifies setting it up that way...each server has all the others and itself listed.
I was following the procedures delineated in the Admin Guide and in the man-pages (including how I understood what was put out on the board):
>From the Admin Guide:
8.3.3. N-Way Multi-Master

For the following example we will be using 3 Master nodes. Keeping in line with test050-syncrepl-multimaster of the OpenLDAP test suite, we will be configuring slapd(8) via cn=config

This sets up the config database:

     dn: cn=config
     objectClass: olcGlobal
     cn: config
     olcServerID: 1

     dn: olcDatabase={0}config,cn=config
     objectClass: olcDatabaseConfig
     olcDatabase: {0}config
     olcRootPW: secret

second and third servers will have a different olcServerID obviously:

     dn: cn=config
     objectClass: olcGlobal
     cn: config
     olcServerID: 2

     dn: olcDatabase={0}config,cn=config
     objectClass: olcDatabaseConfig
     olcDatabase: {0}config
     olcRootPW: secret

This sets up syncrepl as a provider (since these are all masters):

     dn: cn=module,cn=config
     objectClass: olcModuleList
     cn: module
     olcModulePath: /usr/local/libexec/openldap
     olcModuleLoad: syncprov.la

Now we setup the first Master Node (replace $URI1, $URI2 and $URI3 etc. with your actual ldap urls):

     dn: cn=config
     changetype: modify
     replace: olcServerID
     olcServerID: 1 $URI1
     olcServerID: 2 $URI2
     olcServerID: 3 $URI3

     dn: olcOverlay=syncprov,olcDatabase={0}config,cn=config
     changetype: add
     objectClass: olcOverlayConfig
     objectClass: olcSyncProvConfig
     olcOverlay: syncprov

     dn: olcDatabase={0}config,cn=config
     changetype: modify
     add: olcSyncRepl
     olcSyncRepl: rid=001 provider=$URI1 binddn="cn=config" bindmethod=simple
       credentials=secret searchbase="cn=config" type=refreshAndPersist
       retry="5 5 300 5" timeout=1
     olcSyncRepl: rid=002 provider=$URI2 binddn="cn=config" bindmethod=simple
       credentials=secret searchbase="cn=config" type=refreshAndPersist
       retry="5 5 300 5" timeout=1
     olcSyncRepl: rid=003 provider=$URI3 binddn="cn=config" bindmethod=simple
       credentials=secret searchbase="cn=config" type=refreshAndPersist
       retry="5 5 300 5" timeout=1
     -
     add: olcMirrorMode
     olcMirrorMode: TRUE

I followed what is put in the Admin Guide, etc...

Thanks

-----Original Message-----
From: openldap-technical-bounces@OpenLDAP.org [mailto:openldap-technical-bounces@OpenLDAP.org] On Behalf Of Quanah Gibson-Mount
Sent: Thursday, February 13, 2014 1:57 PM
To: Borresen, John - 0442 - MITLL; openldap-technical@openldap.org
Subject: Re: Syncrepl and mmr

--On Thursday, February 13, 2014 10:54 AM -0500 "Borresen, John - 0442 - MITLL" <John.Borresen@ll.mit.edu> wrote:

> All,

Your configuration is very confused.  Why do you have the master replicate to itself, for example?

--Quanah


--

Quanah Gibson-Mount
Architect - Server
Zimbra, Inc.
--------------------
Zimbra ::  the leader in open source messaging and collaboration

Follow-Ups:
- RE: Syncrepl and mmr
  - From: "Borresen, John - 0442 - MITLL" <John.Borresen@ll.mit.edu>

References:
- Syncrepl and mmr
  - From: "Borresen, John - 0442 - MITLL" <John.Borresen@ll.mit.edu>
- Re: Syncrepl and mmr
  - From: Quanah Gibson-Mount <quanah@zimbra.com>
- RE: Syncrepl and mmr
  - From: "Borresen, John - 0442 - MITLL" <John.Borresen@ll.mit.edu>
- RE: Syncrepl and mmr
  - From: "Borresen, John - 0442 - MITLL" <John.Borresen@ll.mit.edu>

Prev by Date: RE: Syncrepl and mmr
Next by Date: ldap/pwd complexity and PAM?
Index(es):
- Chronological
- Thread